Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
This KPD88 DEUTZ GENERATOR SET DATA Rated 80kVA 64kw Standby 88kVA 70kw Deutz (BF4M2012C) weatherproof silent generator is the perfect choice for reliable power. With a rated power output of 80kVA/64kw and a standby output of 88kVA/70kw, this generator ensures maximum efficiency and performance. The BF4M2012C engine is powerful and reliable, and the weatherproof design ensures it is suitable for use in any environment. The silent operation ensures minimal noise disruption and maximum convenience. This generator is perfect for those who need reliable and efficient power.
|
Genset Model |
KPD88 |
|
Prime Power |
80KVA/64KW |
|
Standby Power |
88KVA/70KW |
|
Size & Weight (Open type) |
2000*900*1330mm (1100kg) |
|
Size & Weight (Silent type) |
2550*1050*1550mm (1590kg) |
|
Standard Features |
Fans are driven by belt, with safety guard/Ripple flex exhaust pipe, exhaust siphone, flange, muffler |
|
Voltage |
380/220V |
|
Frequency |
50Hz |
|
Phase & wires |
3phase, 4wires |
|
Power factor |
COSΦ=0.8（lagging） |
|
Battery |
12V |
|
Fuel Tank |
The power less than 500kw open type and all of silent type have fuel tank. 8 hours. |
|
Radiator |
50°C suitable for tropical weather |
|
Diesel Engine Data |
|
|
Brand & Model |
Deutz BF4M2012C |
|
Country of Origin |
Germany joint-venture with china |
|
Cycle |
4 stroke |
|
Engine power (kwm) |
74.9 |
|
Air intake way |
Turbo |
|
Governor |
Mechanical |
|
Cylinder |
4 |
|
Bore*Stroke (mm) |
101*126 |
|
Displacement (L) |
4.04 |
|
Fuel consumption |
217g/kw.h (16.5l/hr) against prime power |
|
Compression Ratio |
18.4:1 |
|
Total coolant capacity (L) |
15.9 |
|
Lubrication capacity (L) |
8.5 |
|
Combustion system |
direct injection |
|
Frequency & Speed |
50Hz, 1500RPM |
|
Cooling way |
Water cooled |
|
Alternator Data |
|
|
Brand |
Kanpor STF |
|
Model |
Kanpor STF224G 64KW |
|
Power Factor(COS Phi) |
0.8 |
|
Excite Type |
Brushless SHUNT/PMG |
|
Connecting Type |
3 Phase & 4 Wires |
|
Insulation Degree |
H |
|
Enclosure Degree |
IP23 |
|
AVR voltage regulation rate |
≤±0.5% |
|
Controller Data |
|
|
Brand & Model |
Smartgen 6110/6120 |
|
Two language interface: |
Chinese/English |
|
Start or Stop Generator set |
manually / automatically; |
|
Open controller output |
can be defined as Pre-heat/Idle output. |
|
High Coolant temperature protection; |
|
|
Low Oil pressure protection. |
|
|
Over speed protection |
|
|
Over load protection; |
|
|
Generator over/under frequency protection: |
|
|
Generator over/under/unbalance voltage Protection |
|
Engine Feature
1. Diesel, heavy-duty, four-stroke, water-cooled, and direct injection fuel system.
2. 24/12V D.C starter and charger alternator.
3. Industrial capacity exhaust silencer supplied loose with flexible section.
4. Engine driven cooling fan with protection guard.
5. Steel wire braided fuel lines, vent and rain fittings.
6. Set mounted acid battery installed with leads and terminals.
Alternator Feature
Control System:
1. Protection: Automatic start/stop, load transfer and alarming of generator;
2. Three channel analog inputs, may joint with Resistive-type temperature/ pressure/ fuel level;
3. sensors, Several temperature and pressure sensors can be used directly (ie. VDO, DATCON, KANPOR KANGMINGSI ), also may select "user defined" sensor via entering 8 point curves;
4. Display of generator accumulate electric energy;
5. Security password-protected programming levels;
6. Several crank success conditions are optional;
7. Power supply range is wide, accommodating to different starting battery voltage environments;
8. All parameters use digital modulation, abandoning analog modulation using conventional electronic potentiometer, reliability and stability are increased;
9. Built-in watch dog can never be dead halt, ensuring smooth program execution.
Prime power (PRP): Prime power is available for an unlimited number of annual hours in available load application . 10% overload capability is available for a period of 1 hour within a 12-hour period of operation.
Standby power (ESP): The standby power is application for supplying emergency power for the duration of a utility power interruption .No overload ,utility parallel or negotiated outage operation capability is available at this rating.
FREE UPDATE TO:
